RESNET® releases draft PDS-01 of RESNET 1550, Embodied Carbon, for public review and comment. The standard provides a consistent methodology for the calculation and reporting of the embodied carbon of dwelling and sleeping units. The standard defines the scope for calculating embodied carbon and a methodology for conducting the calculations that uses the same modeling data and processes and reporting employed by standard ANSI/RESNET/ICC 301. Comments will be accepted only on text in draft PDS-01 shown by strike-through and underline and in red print. To review and comment on the Draft follow the links below. The public comment period begins November 22, 2024, and ends January 21, 2025. Comments are posted and you will be able to review comments by clicking on “VIEW COMMENTS HERE” below. To submit your comments and view the draft Standard, click on “SUBMIT COMMENTS and REVIEW DRAFT HERE” below. All comments are posted on the website for review. RESNET® Draft PDS-01 RESNET 1550, Embodied Carbon December 10 Webinar Slides Recording SUBMIT COMMENTS & VIEW DRAFT HERE Draft PDS-01 RESNET 1550, Embodied Carbon To review the draft click on Draft PDS-01 RESNET 1550, Embodied Carbon COMMENTER First Name: * Last Name: * Affiliation * (who you represent) LOCATION Country : * United States of AmericaCanada Address: * City: * State/Province: * AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyoming Zip Code: * CONTACT INFORMATION Phone Number: * Email Address: * COMMENT Page Number: * Section/Table/Figure Number: Comment Intent: * Select a Comment IntentObjectionNot an Objection Comment Type: * Select a Comment TypeGeneralTechnicalEditorial Click the "DOWNLOAD FORM" link below to complete your comment and proposed change, then upload the completed form below. Use "strikethrough" and "underline" formatting to indicate all proposed changes. Changes must be shown with "hard-formatting" strikethrough and underline, not "track changes." DOWNLOAD FORM Upload Comment and Proposed Change Form * Drop a file here or click to upload Choose File Maximum file size: 268.44MB Submit Start Over If you are human, leave this field blank. VIEW COMMENTS HERE Entry Date: November 22, 2024 at 2:53 PM Full Name: Robert LepageAffiliation: Climes Group Engineering Inc.Address: 83 Belmont Ave W Kitchener, Ohio N2m1L5Phone Number: 2268689865Email: rob@climesgroup.caPage Number: NASection/Table/Figure Number: NAComment Intent: ObjectionComment Type: TechnicalComment and Proposed Change: DownloadEntry Date: November 22, 2024 at 3:21 PM Full Name: Connor DillonAffiliation: Building Science Institute, Ltd. Co.Address: PO Box 406 Geronimo, Texas 78115Phone Number: 8303088505Email: info@buildingscienceinstitute.orgPage Number: 27Section/Table/Figure Number: 7.2.3Comment Intent: ObjectionComment Type: GeneralComment and Proposed Change: DownloadEntry Date: November 25, 2024 at 2:31 PM Full Name: Brian TrimbleAffiliation: International Masonry InstituteAddress: 1305 Crest Ln Oakdale, Pennsylvania 15071Phone Number: 7033000109Email: btrimble@imiweb.orgPage Number: throughout documentSection/Table/Figure Number: throughout all tablesComment Intent: ObjectionComment Type: GeneralComment and Proposed Change: DownloadEntry Date: December 9, 2024 at 5:08 PM Full Name: Rob SianchukAffiliation: Rob Sianchuk ConsultingAddress: 300 – 420 W Hastings St. Vancouver, Alabama V6B 1L1Phone Number: 11111111111Email: info@robsianchukconsulting.caPage Number: SeveralSection/Table/Figure Number: SeverakComment Intent: ObjectionComment Type: TechnicalComment and Proposed Change: Download Tips and Reminders for Submitting Public Comments Comments must pertain to the changes shown in the draft as either strike-through or underlined text in red print. Comments not on the changes under consideration will be rejected. Comments should include a specific proposed change to the text of the draft open for comment and an explanation sufficient for the review committees to understand the commenter’s concern or objection. Proposed added text must be underlined and text proposed to be removed must be shown using strike-through. If not submitted in this format, the public comment may be rejected. Do not submit comments on other chapters or on sections or proposed changes that are not identified as open for public comment by red print. Comments not on the proposal under consideration will be rejected. If you submit public comment representing the collective interests of a group of stakeholders, you are encouraged to submit ONE public comment and identify all stakeholders in that comment. While not required, this expedites the ability of the committees to respond to commenters in a timely manner. Public comments are reviewed by committees comprised of volunteer members, that are Raters, Providers, Software Developers and other industry and public interest stakeholders. They are not reviewed by RESNET Staff. Most amendments to RESNET standards are proposed by industry and public stakeholders not RESNET. To learn more about submitting proposed amendments visit this page: https://www.resnet.us/about/standards/submit-proposed-amendments/
